تكوين لوحة المشاهدات المنفردة للسيطرة النوعية باستخدام معدل أوقات بين الفشل مع التطبيق
##semicolon##
https://doi.org/10.25212/lfu.qzj.2.1.08##semicolon##
Control Chart, Reliability, Mean time between failure, Exponential Distribution.پوختە
This study was conducted in order to use mean times of failure and another in the reliability in order to make chart individual values to quality control with the apply it. The study concluded with a conclusion that the average mean times of failure for production processes (tire factory) was in control case, because any of the samples did not locate outside the bounds of the control chart, and also configure the limits of maintenance control of predictive, which is one of the key factors that help to achieve the maintenance predictive goals, focusing new area of control over the device and detect any malfunction occurs in the
production process so as to stop the production process and remove the causes of the imbalance if there is any
##plugins.generic.usageStats.downloads##
سەرچاوەکان
]الراهي: عبدالرحيم خلف ،رشيد:كاوه محمد "أستخدام أسلوب متعدد المتغيرات للسيطرة على نوعية صفتي التشبع والكلس الحر لمعمل أسمنت طاسلوجة " المجلة العراقية للعلوم االحصائية . 9558( 64)العدد
]6 ]الخزرجي، أحمد عبد علي، 2001 (: مقارنة طرائق تقدير المعولية للبيانات الكاملة باستخدام المحاكاة مع تطبيق عملي(. رسالة ماجستير، كلية علوم الحاسبات والرياضيات، جامعة الموصل، العراق.
]3[ Besterfield, D. H. (2004): Quality Control. 7thEdition, Prentice-Hall Inc. New York, U.S.A.
Besterfield, D. H. (1979): Quality Control. Prentice-Hall Inc. New York, U.S.A.
Ebeling, C.E., 1997, “ An Introduction to Reliability and Maitamability Engineering”, McGraw-Hill.
]2[ K.Ramchand H Rao, Dr. R.Satya Prasad, Dr. R.R.L.Kantham, monitoring Software Reliability Using SPC: An Order Statistics Approach, International Journal of Computer Applications (0975 – 8887) Volume 32– No.7, October 2011.
]7[ Kalbfleisch, J.D. & Prentice, R.L., 2nd ed. 2002, “The Statistical Analysis of ]8[Montgomery, D. C. (2005): Introduction to Statistical Quality Control. 5thEdition, John Wiley & Sons Inc. New York, U.S.A.
]2[ Sleeper, Andrew. (2007): Six Sigma Distribution Modeling. McGraw-Hill Book Company. New York, U.S.A.
##submission.downloads##
بڵاو کرایەوە
چۆنییەتی بەکارهێنانی سەرچاوە
ژمارە
بەش
##submission.license##
##submission.copyrightStatement##
##submission.license.cc.by-nc-sa4.footer##Qalaai Zanist Journal allows the author to retain the copyright in their articles. Articles are instead made available under a Creative Commons license to allow others to freely access, copy and use research provided the author is correctly attributed.
Creative Commons is a licensing scheme that allows authors to license their work so that others may re-use it without having to contact them for permission
