Construction of New Standardized Attribute Control Chart based on defects per million opportunities

Dashty Ismil Jamil; Dlshad Mahmood Saleh; Alan Ghafur Rahim

doi:10.25212/lfu.qzj.3.3.34

Construction of New Standardized Attribute Control Chart based on defects per million opportunities

Authors

Dashty Ismil Jamil Lebanese French University
Dlshad Mahmood Saleh Salahaddin University
Alan Ghafur Rahim Knowledge University

DOI:

https://doi.org/10.25212/lfu.qzj.3.3.34

Keywords:

Abstract

To understand the concepts of Six Sigma, the concepts of Defects Per Unit (DPU) and Defects Per Opportunities (DPO) need to be introduced. DPU and DPO have different implications from attribute and variable data perspectives. The aim of this paper is to Construction quality control chart, which is Standardized attribute control chart based on defects per million opportunities (dpmo) to justify the efficiency and sensitively of the new chart for detecting are out of control cases. Using example, it was found that the examined processes were in control on both charts .The chart suggested herein may be useful for companies practicing Six Sigma process. These charts can be used to replace existing Shewhart control charts implemented when companies first started implementing Six Sigma.

Downloads

Download data is not yet available.

References

Alan Chow, Ameina Tressler, and Kelly C. Woodford (2013). A Comparison of Control Charting Applications for Variable Sample Sizes in Service Processes. Journal of Business, Industry and Economics . Volume 18.pp109-126.

Besterfield, D. H. (2009) “Quality Control”. 8th Edition. New York: Prentice-Hall Inc. 3. Grant, E. L. & Leavenworth, R. S. (1988) “Statistical Quality Control”. 6th Edition, McGraw-Hill. Book Company. New York, U.S.A.

Montgomery, D. C. (2005): Introduction to Statistical Quality Control”. 5thEdition, John Wiley & Sons Inc. New York, U.S.A.

Radhakrishnan, R., & Balamurugan, P. (2010). Six Sigma based control charts for number of defectives. Proceedings of the 2010 International Conference on Industrial Engineering and Operations Management, Dhaka, Bangladesh, 92.

Santos, D.L. (2008). Beyond Six Sigma – A Control Chart for Tracking Defects Per Billion Opportunities (dpbo). International Conference on Industrial Engineering, Las Vegas, NV, Sept. pp. 228-233. I

Downloads

Published

2018-09-30

How to Cite

Dashty Ismil Jamil, Dlshad Mahmood Saleh, & Alan Ghafur Rahim. (2018). Construction of New Standardized Attribute Control Chart based on defects per million opportunities. QALAAI ZANIST JOURNAL, 3(3), 734–745. https://doi.org/10.25212/lfu.qzj.3.3.34

Download Citation

Issue

Vol. 3 No. 3 (2018)

Section

Articles

License

This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

Qalaai Zanist Journal allows the author to retain the copyright in their articles. Articles are instead made available under a Creative Commons license to allow others to freely access, copy and use research provided the author is correctly attributed.

Creative Commons is a licensing scheme that allows authors to license their work so that others may re-use it without having to contact them for permission